The stainless-steel CM225 attaches one pyranometer or quantum sensor to a mast, crossarm, or pole (1 to 2 in. OD). Many pyranometers and quantum sensors also require a leveling base that secures the sensor to the CM225 as well as level the sensor.
The CM225 consists of a rectangular plate, mounting bracket, U-bolts, lock washers, and nuts.
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
| Product | Compatible | Note |
|---|---|---|
| CMP11-L (retired) | Assumes the CMP11 is not housed in the CVF4 Heater/Ventilation Unit. | |
| CMP21-L | Assumes the CMP21 is not housed in the CVF4 Heater/Ventilation Unit. | |
| CMP6-L (retired) | Assumes the CMP6 is not housed in the CVF4 Heater/Ventilation Unit. | |
| CS300-L (retired) | Requires the 18356 Leveling Base. | |
| LI190SB-L (retired) | Requires the LI2003S Leveling Base. | |
| LI200R-L | Requires the LI2003S Leveling Base. | |
| LI200RX-L (retired) | Requires the LI2003S Leveling Base. | |
| LI200S-L (retired) | Requires the LI2003S Leveling Base. | |
| LI200X-L (retired) | Requires the LI2003S Leveling Base. | |
| SP-LITE-L (retired) |
| Product | Compatible | Note |
|---|---|---|
| CM10 (retired) | ||
| CM106 (retired) | ||
| CM106B | ||
| CM110 | ||
| CM115 | ||
| CM120 | ||
| CM202 | ||
| CM202SS | ||
| CM203 | ||
| CM204 | ||
| CM204SS | ||
| CM206 | ||
| CM6 (retired) | ||
| UT10 | ||
| UT20 | ||
| UT30 |
The U-bolt and V-block use the bracket's side holes to attach to a tripod or tower mast or to a user-supplied vertical pole.
The CM225 can mount to a 0.75 to 1.5 in. pipe size (1 to 2 in. OD).
| Why/When to Use | Used when the pyranometer only needs to be mounted in a horizontal position. It is also typically used with a crossarm. |
| Material | 12 gage, 304 stainless steel |
| Dimensions | 8.9 x 11.3 x 6.4 cm (3.5 x 4.5 x 2.5 in.) |
| Weight | 0.34 kg (0.75 lb) |