32262 2 dBd 4G/3G Multiband Omnidirectional Antenna with Mounting Hardware

Overview

The 32262 is an omnidirectional antenna with mounting bracket that is ideally suited for use with 4G and 3G cellular gateways. The mounting bracket attaches to a mast or crossarm, and it serves as the antenna ground plane. The antenna has an N type (female) threaded permanent stud for easy mounting to the included bracket or through an enclosure wall. A coaxial cable, sold separately, is required to connect this antenna to the inline surge suppression or radio antenna jack.

Note: In the image, the antenna and mounting bracket are shown attached to a pole.

Images

Antenna with mounting hardware
Antenna with mounting hardware
Antenna with mounting hardware
Antenna with mounting hardware
Antenna alone

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Dataloggers

Product Compatible Note
CR300 (retired) Compatible with the -CELL2XX options.
CR310 Compatible with the -CELL2XX options.
CR350 Compatible with the -CELL2XX options.

Communication Devices

Product Compatible Note
34282
34283PM
34284
34285
LS300G (retired)
RAVEN100 (retired)
RAVEN105 (retired)
RAVEN110 (retired)
RAVENXTA (retired)
RAVENXTG (retired)
RAVENXTV (retired)
REDWING100 (retired)
REDWING105 (retired)
RV50 (retired)
RV50X

Additional Compatibility Information

The 32262 is well suited for 4G/3G cellular communications.

Specifications

Antenna
Type Omnidirectional, multiband
Use 4G/3G cellular, outdoor or indoor, fixed location or mobile
Frequency Range
  • 698 to 960 MHz
  • 1710 to 2700 MHz
Nominal Peak Gain
  • 1.4 dBd (@ 698 to 960 MHz)
  • 3.3 dBd (@ 1710 to 1990 MHz)
  • 2.4 dBd (@ 2100 to 2700 MHz)
VSWR < 2.5:1
Radome Material High heat ABS
Polarization Vertical
Impedance 50 ohm
Maximum Input Power 100 W
Input Connection Type N, threaded, female
Operating Temperature -40° to +85°C
Dimensions 8.38 x 3.66 cm (3.3 x 1.44 in.)

Mount/Ground Plane
Material Clear anodized aluminum
Hardware 5/16-18 in. x 2.125 in. stainless-steel U-bolt (with brass nuts and stainless-steel flat and lock washers)